The LEG3ND ELITE gives divers unprecedented capabilities by providing perfect precision and enhanced ergonomics at your fingertips.
Advanced divers appreciate the independent micro adjustments to fine-tune their own individual breathing preferences.?
Specs
First Stage
- Type of first stage Overbalanced diaphragm design
- Auto-Closure Device (ACD) Yes
- Number of HP ports 2
- Number of MP ports 4
- 1st Stage Flow Rate 1500 l/min
- 1st Stage Weight in DIN 747 g
- 1st Stage Weight in Yoke 957 g
- Environmental Dry Kit Permanent
- First stage exterior Chrome over marine brass
Second Stage
- Type of second stage Pneumatically balanced
- Controls Venturi switch
- Breathing resistance Adjsutable
- Mouthpieces 2ea. – A Comfo-Bite, installed, and a standard with bite wings in the box
- Lip shield Included
- Heat Exchanger for freezing resistance Standard on all models
- 2nd Stage Weight 227 g
- Hose length 730 mm
- Overall work of breathing (WOB) scores Avg. 0.70 joules/liter
- Nitrox compatible Yes, to 40% O2 when new, out of the box
Features
First Stage
- When the first stage is not connected to a cylinder valve, the Auto Closure Device (ACD) keeps the inlet shut to protect the first stage internal parts from contamination and corrosive water.
- Preserves the internal lubrication
- Keeps the inlet filter clean and dry
- Safer for elevated percentages of oxygen
- Exceptional cold-water performance is achieved by modernizing Aqualung's three anti-freeze properties:
- Where there's no moisture, there's no ice: The LEG3ND's integrated dry chamber keeps inner components clean and dry by isolating them from the outside environment
- Deep ribs create a large heat exchange surface area that helps to prevent ice forming on the mechanism (+30% vs Glacia / +70% vs Legend 2)
- The new overmolded cap delays ice forming over the external diaphragm
- Auto-Balanced (also known as Over-Balanced)
- Progressive increase of the working pressure to maintain optimum breathing efforts: Depending on the diver's depth, the working pressure of the first stage is automatically elevated to counteract the increased breathing air density
- Ergonomically shaped DIN and YOKE screws made of a bi-material “Soft Grip” surface provide a better hold when installing or removing the first stage – especially with cold hands
- Channeled YOKE screw to prevent water retention.
- Specialized ACD Dust cap attached to the regulator body to protect the inlet fitting and the ACD system from impacts or damage
- Perfectly positioned HP and MP ports provide optimal hose routing
Second Stage
- New front cover opening channels allow water to flow sideways over the diaphragm
- Radial openings to prevent freeflows when diving in stronger currents
- Openings widened to reduce peak inspiratory flow by an impressive 20%
- New overmolded exhaust cover made of elastomer with a “soft touch” effect
- Overmolded air purge
- Wide surface area makes regulator purging easier
- Purge depth controller optimizes air flow with minimal effort
- Patented Comfobite mouthpiece reduces jaw fatigue and secures the second stage more comfortably.
- Detachable and reusable mouthpiece clamp allows a quick and simple tool-free mouthpiece change without plastic waste.
- The enlarged heat exchanger helps to prevent freezing of the second stage mechanism
- Air channel deflector
- Directs the air flow evenly during the inhalation phase
- Streamlined bi-material deflector lowers the exhalation effort
- Flexible and lightweight Aqua Flex hose with dual protectors
0 reviews for LEG3ND ELITE, YOKE
Write a review
Similar Products
